Cloud Phase Discrimination by Reflectance Measurements near 1.6 and 2.2 μm

1987 ◽  
Vol 44 (22) ◽  
pp. 3419-3420 ◽  
Author(s):  
P. Pilewskie ◽  
S. Twomey
Keyword(s):  
Phase Discrimination ◽  
Reflectance Measurements

Forensic applications of IR infrared microscopic internal reflection spectroscopy

1992 ◽  
Vol 50 (2) ◽  
pp. 1528-1529
Author(s):  
Edward G. Bartick ◽  
John A. Reffner
Keyword(s):  
Specular Reflection ◽  
Forensic Analysis ◽  
Attenuated Total Reflection ◽  
Internal Reflection ◽  
Standard Size ◽  
Ir Microscopy ◽  
Ir Analysis ◽  
Plastic Explosives ◽  
Internal Reflection Spectroscopy ◽  
Reflectance Measurements

Since the introduction of commercial Fourier transform infrared (FTIR) microscopic systems in 1983, IR microscopy has developed as an important analytical tool in research, industry and forensic analysis. Because of the frequent encounter of small quantities of physical evidence found at crime scenes, spectroscopic IR microscopes have proven particularly valuable for forensic applications. Transmittance and reflectance measurements have proven very useful. Reflection-absorption, specular reflection, and diffuse reflection have all been applied. However, it has been only very recently that an internal reflection (IRS) objective has been commercially introduced.The IRS method, also known as attenuated total reflection (ATR), has proven very useful for IR analysis of standard size samples. The method has been applied to adhesive tapes, plastic explosives, and general applications in the analysis of opaque materials found as evidence. The small quantities or uncontaminated areas of specimens frequently found requiring forensic analysis will often be directly applicable to microscopic IRS analysis.

scholarly journals Experimental and Physico-Chemical Comparison of ZnO Nanoparticles’ Activity for Photocatalytic Applications in Wastewater Treatment

Catalysts ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 678
Author(s):  
Stefano Alberti ◽  
Irene Basciu ◽  
Marco Vocciante ◽  
Maurizio Ferretti
Keyword(s):  
Wastewater Treatment ◽  
Zno Nanoparticles ◽  
Energy Dispersive Spectrometer ◽  
Chemical Properties ◽  
X Ray Diffraction ◽  
Commercial Sample ◽  
Synthetic Process ◽  
Physico Chemical ◽  
Photocatalytic Applications ◽  
Reflectance Measurements

In this contribution, the photoactivity upon activation by simulated sunlight of zinc oxide (ZnO) obtained from two different synthetic pathways (Acetate and Nitrate) is investigated for water purification. Different reagents and processes were exploited to obtain ZnO nanoparticles. Products have been characterized by means of X-Ray Diffraction, Scanning Electron Microscopy along with Energy Dispersive Spectrometer, Dynamic Light Scattering, and Diffuse Reflectance Measurements, to highlight the different outcomes ascribable to each synthesis. A comparison of characteristics and performances was also carried out with respect to commercial ZnO. Nanoparticles of this semiconductor can be obtained as aggregates with different degrees of purity, porosity, and shape, and their physical-chemical properties have been addressed to the specific use in wastewater treatment, testing their effectiveness on the photocatalytic degradation of methylene blue (MB) as a model pollutant. Excluding the commercial sample, experimental results evidenced a better photocatalytic behavior for the ZnO Nitrate sample annealed at 500 °C, which was found to be pure and stable in water, suggesting that ZnO could be effectively exploited as a heterogeneous photocatalyst for the degradation of emerging pollutants in water, provided that thermal treatment is included in the synthetic process.

scholarly journals Mechanistic Study on Gold-Like Luster Development of Solution-Cast Oligo(3-methoxythiophene) Film

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 861
Author(s):  
Minako Kubo ◽  
Minako Tachiki ◽  
Terumasa Mitogawa ◽  
Kota Saito ◽  
Ryota Saito ◽  
...  
Keyword(s):  
Microscopic Analysis ◽  
Mechanistic Study ◽  
Free Electrons ◽  
Coating Films ◽  
Electron Microscopic ◽  
Regular Structures ◽  
Scanning Electron Microscopic ◽  
Solution Cast ◽  
Scanning Electron Microscopic Analysis ◽  
Reflectance Measurements

Solution-cast coating films of perchlorate-doped oligo(3-methoxythiophene) exhibited a gold-like luster similar to that of metallic gold despite the involvement of no metals. However, the development mechanism of the luster remains ambiguous. To understand the mechanism, we performed scanning electron microscopic analysis, variable-angle spectral reflectance measurements, and ellipsometry measurements on ClO4−-doped oligo(3-methoxythiophene) cast film with a gold-like luster. The results revealed that the lustrous color of the film was not induced by the submicron-sized regular structures (structural color), nor by the high-density free electrons (reflective response based on Drude model), but by the large optical constants (refractive index and extinction coefficient) of the film, as speculated previously.

scholarly journals Effect of SiO2 and TiO2 Nanoparticles on the Performance of UV Visible Fluorescent Coatings

Coatings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 928
Author(s):  
Sanja Mahović Poljaček ◽  
Tamara Tomašegović ◽  
Mirjam Leskovšek ◽  
Urška Stanković Elesini
Keyword(s):  
Tio2 Nanoparticles ◽  
Degradation Process ◽  
Bending Stiffness ◽  
Attenuated Total Reflection ◽  
Surface Coatings ◽  
Accelerated Ageing ◽  
Sem Images ◽  
Structural Surface ◽  
Uv Visible ◽  
Reflectance Measurements

In the present research, the properties of ultraviolet (UV) visible (daylight invisible) fluorescent coatings modified by the addition of SiO2 and TiO2 nanoparticles were studied. Structural, surface, and mechanical properties and changes in the coatings caused by accelerated ageing were analyzed. The results showed that the addition of nanoparticles caused the changes in unaged and aged printed coatings. Reflectance measurements of modified coatings showed that addition of TiO2 nanoparticles improved the visual effect of the unaged coatings. Furthermore, results have shown that the addition of SiO2 did not diminish the reflectance of the modified coatings after ageing. The results of roughness measurements showed that the addition of SiO2 decreased roughness after the ageing process, probably due to the degradation process indicated by Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) spectroscopy. The roughness of the coatings with TiO2 nanoparticles was increased after the ageing on the samples with higher concentrations of TiO2 due to the agglomerates of plastisol formed on the surface of the coatings, visible in SEM images. Surface analysis of coatings showed that TiO2 caused an increase in the polarity of the surface coatings. Results of the bending stiffness showed that the addition of the nanoparticles to the coating, especially of SiO2, significantly improved the bending stiffness of the unaged samples.

scholarly journals Reflections on iridescent neck and breast feathers of the peacock, Pavo cristatus

2018 ◽  
Vol 9 (1) ◽  
pp. 20180043 ◽  
Author(s):  
Pascal Freyer ◽  
Bodo D. Wilts ◽  
Doekele G. Stavenga
Keyword(s):  
Three Dimensional ◽  
Refractive Indices ◽  
Rectangular Lattice ◽  
Pavo Cristatus ◽  
Feather Coloration ◽  
Air Channels ◽  
Difference Time ◽  
Modelling Methods ◽  
Reflection Characteristics ◽  
Reflectance Measurements

The blue neck and breast feathers of the peacock are structurally coloured due to an intricate photonic crystal structure in the barbules consisting of a two-dimensionally ordered rectangular lattice of melanosomes (melanin rodlets) and air channels embedded in a keratin matrix. We here investigate the feather coloration by performing microspectrophotometry, imaging scatterometry and angle-dependent reflectance measurements. Using previously determined wavelength-dependent refractive indices of melanin and keratin, we interpret the spectral and spatial reflection characteristics by comparing the measured spectra to calculated spectra by effective-medium multilayer and full three-dimensional finite-difference time-domain modelling. Both modelling methods yield similar reflectance spectra indicating that simple multilayer modelling is adequate for a direct understanding of the brilliant coloration of peacock feathers.

Sign in / Sign up

Export Citation Format

Share Document